|
Stanley Furniture, Inc, located in Lexington, NC uses a 1.4 million Btu/hour Heatec HCI thermal fluid heater. It heats presses that produce wood veneers for their bedroom furniture.
The heater has a double-wound helical coil made to ASME code. it has an outlet temperature of 450 degrees F.
The heater is equipped with two independent pumps for circulating thermal fluid. One circulates fluid through the top platen of the press. the other circulates fluid through the bottom platen. The temperatures of the top and bottom platens are controlled independently.
The control panel is a UL approved, Type 12 enclosure.
| 
