Polymer Blending System
Name:
E-mail:
Company:
City:
State or Province:
Country:
Phone:
Where system is to be installed or shipped
(City/State/Country):
Configuration:
Stationary
Portable
Skid-mounted
Type of production:
Batch
Continuous
Indoor or Outdoor installation?
Indoors
Outdoors
What polymers will be used?
SBS - (Styrene-Butadine-Styrene)
GTR - (Ground Tire Rubber)
Other:
What is your required production rate in tons per hour?
What percentage of polymer per tons per hour specified?
What is the particle size of the polymer (if known)?
Size of polymer hopper in cubic feet:
Include a box handler for unloading polymer into hopper?
Yes
No
Include a jib crane for handling bags of polymer or rubber?
Yes
No
Include a clump breaker in hopper?
Yes
No
Include load cells on hopper?
Yes
No
What is the polymer feed rate into the mixing tank (cfm) ?
When 2 mixing tanks are used:
Include diverter valve with split-leg chute
Include horizontal auger
Number and size of mixing tanks:
Tanks to include overflow protection?
Yes
No
Thickness of insulation on tanks:
3-inch
6-inch
Include load cells on mixing tanks?
Yes
No
Type of level gauge on tanks:
Radar level gauge
Float with gauge board
Type of temperature gauge on tanks:
Remote temperature readout with thermocouple
Local thermometer
Include sampling valve on mixing tanks?
Yes
No
Brand of grinding mill preferred:
Include thermal fluid heating system with helical coil heater?
Yes
No
Include a heat exchanger to boost temperature of virgin asphalt?
Yes
No
Controls to be located indoors or outdoors?
Indoors
Outdoors
Controls to be manual or automatic?
Manual
Automatic
Controls to include chart recorder?
Yes
No
Controls to include asphalt meters?
Yes
No
Electrical power (note Volts, Phase & Hertz):
Use remote-controlled valves?
Yes
No
Provide pump for virgin asphalt?
Yes
No
Provide transfer pump for liquid polymer mix?
Yes
No
Provide hot oil and asphalt piping?
Yes
No
Provide let-down or holding tanks?
Yes
No
Provide asphalt storage tanks? (Please see separate RFQ for asphalt tanks)
Yes
No
Other requirements:
Home
|
Profile
|
Products - Asphalt
|
Products - Industrial
|
Products - Concrete
Literature
|
Tec-Notes
|
Parts
|
Service
|
Employment
|
Contacts
Please contact
Heatec, Inc.
at
Phone (423) 821-5200 | Toll-Free (800) 235-5200 | Fax: (423) 821-7673
5200 Wilson Road | P.O. Box 72760 | Chattanooga, Tennessee 37410
©2008 Astec Industries, Inc. All Rights Reserved.
Legal Notice
|
Privacy Policy
|
Webmaster